Tensile testing machine series
tensile testing machine
Cupping universal
electro-hydraulic servo
Electronic universal tensile testing machine series
Liquid crystal display
Microcomputer control
Hydraulic universal testing machine series
Microcomputer controlled
Microcomputer screen display type
Digital display type
WE-B type cylinder type
Type WEW-D six column
WAW-C worm electro-hydraulic servo
Impact testing machine series
Pendulum type impact
The impact specimen notch broaching
Impact specimen low temperature tank
Impact specimen notch projector
pendulum type impact
Torsion testing machine series
Material machine
Wire torsion testing machine
NDS series digital display
metal wire
wire winding tester
NDW series microcomputer control material
Spring testing machine series
Manual double digital display
Full automatic
Computer controlled
Spring torsion
Spring fatigue
Pressure testing machine series
Digital pressure
Automatic pressure
Manhole cover pressure
microcomputer control constant
electro hydraulic
liquid crystal display type
Steel strand testing machine
Computer screen display
Computer controlled
vertical (horizontal) steel strand relaxation
electro hydraulic servo
screen display steel strand
Ring steel test machine
Microcomputer control
Liquid crystal display
liquid crystal display
microcomputer control
artificial board
Artificial board universal
manual artificial board
artificial board scratch
rolling wear
artificial board universal
falling ball impact
Test machine parts
Electronic extensometer
DX-400 manual management
Test machine parts -1
Test machine parts -2
Test machine parts -3
Bending test machine
reinforcing steel bar
Steel tube
pipe bending
reinforced bar
double reinforced
Hardness tester series
HV-1000 micro
FY310 portable
LX-A portable shore
Metallographic examination equipment
Metallurgical microscope
Metallographic polishing
Metallographic mosaic
Metallographic cutting
WEW-D系列微机屏显式液压万能试验机 WDS系列门式数显电子万能试验机 JB-300B/500B半自动摆锤式冲击试验机 HR-150A洛氏硬度计 TLS-S系列手动双数显弹簧拉压试验机 NDS系列数显式扭转试验机 WDW微机控制电子万能试验机(5-300KN) WAW-B系列微机控制电液伺服万能试验机 YES-2000数显压力试验机 零下30/60/80/100度冲击试样缺口低温槽 方圆FY310便携式里氏硬度计 WDW系列微机控制高低温电子万能试验机

NDS series digital display type torsion testing machine




Name:NDS series digital display type torsion testing machine


Category: digital display type torsion testing machine |  torsion testing machine


Place of origin:Jinan


  First, product introduction:

NDS series digital display type torsion testing machine is based on the GB/T2611-2007 "testing machine general technical requirements" and GB/T10128-1998 "the room temperature torsion test method" standard manufacture. Applicable standards: GB, ASTM, and other domestic and international standards. This machine has the advantages of beautiful appearance, convenient operation and stable performance.

Ji'nan radius of Testing Machines Inc production of microcomputer controlled torsion testing machine combined with foreign advanced control technology, exquisite appearance design. The Taiwan Abba high-precision ultra wide linear guide and were used ultra thick host steel structure high strength host, Taiwan TECO AC servo motor applications do to output the power passed to high-efficiency cycloidal pin wheel reduction system in order to achieve a high performance torque and torsion angle of the output and control.

NDS series digital display type torsion testing machine control system adopts the new all digital acquisition system and high precision torque sensor measurement system. Can realize the automatic calculation of the maximum torque, torsional strength and other data and indicators. The machine has no pollution, low noise, high efficiency, and has a wide range of speed regulation. This machine is suitable for all kinds of metal, nonmetal and composite materials to test the torsion performance, in line with the requirements of relevant national standards.

This machine is widely used in building materials, aerospace, machinery manufacturing, wire and cable, rubber, plastics, automobile manufacturing, shock absorber system industry material test and analysis, scientific research institutions, universities, industrial and mining enterprises, and technical supervision, commodity inspection, arbitration and other departments of the ideal test equipment.

Second, NDS series of digital display type torsion testing machine main technical indicators:

1 maximum dynamic test torque: 20Nm, 50Nm, 100Nm, 200Nm, 500Nm, 1000Nm, 2000Nm;

The indication error of 2 test torque: positive and negative two direction is less than 1%

The indication error of 3 test torque repeatability: positive and negative two direction is less than or equal to 1%

4 maximum torsion angle range: 0 to + 36000 (36000 +);

5 effective test space: 600mm; (0 ~ 600mm range of arbitrary manual adjustment)

6 test machine spindle center height: 260mm;

The coaxial accuracy between the two fixtures: 7 600mm range is less than or equal to 0.2mm

8 torsion angle resolution: 0.10;

9 test speed: 0.0005 ~ 5r/min arbitrary set;

10 voltage and voltage: 50Hz AC220V

11 host size: 1500 x 800 x 1250 (mm) spindle center distance to ground height 760mm

Third, equipment configuration:

L high strength to reverse the host a

2 AC servo control system and AC servo motor

3 Taiwan ABBA precision guide two pairs

4 a set of precision reduction system

5 high precision sensor with a huge twist

6 special blessing a reverse AIDS

7 torsion testing machine specific test and control display system

Extended reading:

NDS digital display torsion testing machine step by step loading method

During the test, first applying torque to the pre sample, pre torque is generally less than expected provisions of torsional stress / p0.015 10% non proportional. Install and adjust zero torque meter. Equivalent to the specified non proportional torsion should be 70% to 80% of tau p0.015 before, high grade torque is applied, applied after the small torque ratings, small torque ratings should be equivalent to less than lOMPa cut stress increment. Read all the corresponding torque and torsion angle. Read each of the time of the data is preferably not more than 10s. The elastic part of the torsional torque calculated from all levels minus the twist angle of the reading angle, the non proportional part of the torsional angle. Applying torque until a non proportional torsion angle is equal to or slightly greater than the value specified.

NDS digital display torsion testing machine working environment

1, at room temperature 10 C ~ 35 C range, the relative humidity is less than 80%;

In 2, a solid foundation or table;

In 3, no vibration and no corrosive medium surrounding environment;

4, in the experimental process, the test pieces bear the torque force measurement pointer has been turned, it is not able to change the range selector knob.

5, emergency stop switch is abnormal when the machine is used in emergency situations, can not be used as a stop button

6, the use of V shaped clamp specimens, the specimen must be clamped to avoid slipping during the test.

7, when the test, if found abnormal phenomenon, should immediately stop, investigate and deal with the cause of failure, to be repaired before re start.

8, the hand wheel switch in the NDS digital display type torsion test machine calibration machine or the case of the use of the disc

9, screw loading speed adjustment knob to slow, that is, the first low speed to load, to achieve a certain deformation, and then transferred to the speed required to load.


© 2012 Copyright:Fangyuan testingmachine Tel:0531-83157169 No 276 West of Nanxinzhuang road,Jinan (former No. 72 Jiwei Road) Lu ICP No. 11007139